Get in Touch with MACY-PAN Company
Hyperbaric Oxygen Systems
Portable Hyperbaric Chambers, Factory-Direct Soft & Hard HBOT Systems
Soft 1.3-1.5 ATA Recovery Chambers and Hard-shell 2.0 ATA systems, built and shipped direct from a 17-year ISO 13485 factory to 126 countries.
Get a Factory Quote →
Soft & Hard / OEM
Key Specifications
01
1.3–1.5 ATA
Soft-shell working pressure
02
93% O₂
At full working pressure
03
18–40 kg
Portable, carry-bag packed
04
5–8 min
Unbox-to-session setup
05
ISO 13485 / CE / SGS
Medical-device manufacturing
06
126 countries
17 years of exports
SELECTION GUIDE
[ Cited Trial ]
- 1.4 ATATrial pressure
- 70 minSession length
- 35–40% O₂Delivered oxygen
Choosing a Portable Hyperbaric Chamber Without the Guesswork
Portable hyperbaric chambers are soft, inflatable units which pressurize to 1.3-1.5 ATA (4.3-7 PSI) and feed 93% oxygen through a concentrator and mask. Most buyers don’t argue the concept- they get taken in by reseller pages, obscuring certifications, equivocating the soft versus hard line, and quoting a chamber price which the concentrator and warranty inflate down-line. MACY-PAN actually builds the chamber, so the spec sheet is what comes from the factory.
The honest version of “does it work?”
Soft chambers won’t reach 2.0-3.0 ATA of a clinical wound care unit and we won’t represent that they do. What the evidence indicates is: a single, randomized trial at 1.4 ATA with 35-40% oxygen for 70 min increased natural killer cell counts and parasympathetic nervous system tone without the feared oxidative stress (NIH/PMC9965672). This is the trade-off we sell upon: authentic wellness and recovery physiology, in an accurately depicted format.
Why is that important? Because mild hyperbaric pressure is widely dismissed by certain medical professionals as “not real HBOT,” a misconception that the immune response data above refutes entirely. It may come counter-intuitively for new users, but comparison studies demonstrate 1.5 ATA provides as many benefits as a 2.0 ATA for general recovery purposes- meaning that a stronger (more potent) solution isn’t always the best answer. MACY-PAN is built to accommodate that reality instead of misrepresenting pressure requirements.
MACY-PAN Portable Chamber Range
This soft-shell range covers five models, so the chamber fits the person rather than the person squeezing into a fixed design. Each model pressurizes between 1.3 and 1.5 ATA, runs a medical-grade 93% (±3%) pure oxygen supply with mask or headset options, and packs into a carry case that sets up in just 5-8 minutes. Shape retention is the build problem MACY-PAN engineers resolved: by integrating an internal metal structure, the chamber maintains its internal space even when completely unpressurized, resolving common concerns with the inward collapsing walls of frameless soft systems.
SYSTEM ENGINEERING ARCHITECTURE
- Chamber construction is SGS-certified medical-grade TPU with no BPA, phthalates, or off-gassing materials. Stitched seams can off-gas glue and silicone fumes on cheaper imports; medical-grade TPU sidesteps that chemical exposure.
- An engineered three-layer YKK zipper closure (inner, middle and outer) seals reliably, with each layer holding pressure independently.
- A built-in air cooler ships with every order to hold chamber temperature. Soft chambers warm slightly after roughly 45 min of continuous use as the compressed air heats up (Charles’s Law), a detail resellers rarely disclose.
- An external oxygen concentrator at 5 or 10 L/min flow feeds 93% high-purity oxygen into the chamber through a headset or face mask.
5-Tier Chamber Selection Framework
| Tier & Model | Form / Position | Interior (L×W×H) | Net Weight | Best for |
|---|---|---|---|---|
| L1 | Vertical sitting, walk-in | 140×100×160 cm | 18 kg | Anti-claustrophobia, smallest footprint, home/clinic |
| ST1700 (M/XL) | Sitting + semi-reclining | 170×70×110 cm (XL 220 cm) | 18 kg | Travel & athletic recovery; sit, read, recline |
| ST701–ST1001 | Lying, 4 diameters | 220×φ70/80/90/100 cm | 28–40 kg | Clinic/gym/spa lying sessions, ≤55 dB |
| ST2200 (L-size) | Sit OR lie, 2-person | 220×70×110 cm | 25 kg | Couples / parent-child / dual-user |
| HE5000 / HP-MC (hard) | Hard-shell 2.0 ATA | 304 stainless, multi-person | ≥575 kg | Clinical-grade, 100% O₂ medical positioning |
Sources: MACY-PAN ST-Series technical specifications ; the structural design principles employed were adapted and registered in US Patent [US8025056B2].
Who Uses Portable HBOT, Recovery, Wellness & the Portable HBOT Payback Estimator
Three buyer types drive home HBOT demand: (1) athletes and active adults chasing faster recovery, (2) home wellness users, and (3) clinics and spas adding hyperbaric oxygen therapy as a revenue service. Recovery studies often report 30%-50% faster recovery than conventional methods, and a mild-HBO trial at 1.4 ATA over 70 min measured gains in immunity and parasympathetic tone (NIH/PMC9965672). Owners most often cite three home hyperbaric chamber benefits: faster recovery, reduced inflammation, and steadier energy.
Portable HBOT Payback Estimator
(illustrative, clinic use)
~9–14 sessions/wk
is the rough break-even band for a soft chamber, before a capital-equipment unit, when clinics charge an industry-typical $100–$350 per session. Wellness-center setups are commonly quoted at $44,000-$104,000/yr in the market. Against that, a single soft unit gives home buyers and clinics a low-risk entry point at an attractive price.
Treat the estimator above as a flexible template; enter your own session price and weekly frequency and the model holds.
Silver-tier estimate. Session pricing: industry average, hyperbaricmedicalsolutions / lasvegasmedicalinstitute. Exact payback varies by chamber model and weekly use, request a custom analysis.
-
SYSTEM 01
For the athlete focused on fast-twitch recovery, there’s the ST1700, lightweight (18 kg) and perfect for mobile applications with your team or for travel.
-
SYSTEM 02
The vertical L1, for the individual at home user not comfortable in tube-style designs; at 100×140 cm, it slides discretely into a corner of your space. It can even be “walked-in” to assist those experiencing panic attacks.
-
SYSTEM 03
Clinic and Spa through-put requires the ultra-quiet (55db) L-line of HBOT devices. This series is built for high volume, quick sanitization and comes with a fully machine-washable inner cover for ease between clients.
-
SYSTEM 04
For shared/family use, our ST2200 dual-user system comes standard with dual oxygen delivery capability so each user benefits from the efficiency of a single oxygen concentrator.
Understand that even our powerful Medical 2.0 ATA line requires pairing if you wish to deliver on a reimbursable medical indication, so a clinic dedicated to that end must pair ours (the top tier 2.0 Ata units), or look elsewhere; a mild unit is only appropriate for wellness & recovery.
Want the payback math on your numbers?
Get an ROI estimate for your session price →
Soft-vs-Hard HBOT Comparison Matrix, The Honest Version
The #1 error that first-time buyers make is confusing soft and hard hyperbaric chambers and treating them as interchangeable items at differing price points. One is a wellness and recovery device (soft), and one is a medical-grade tool (hard); get them mixed up, and you face compliance risk and a disappointed customer.
SYSTEM / MILD HBOT
Soft-shell Chamber
1.3–1.5 ATA Working Pressure
Soft-shell Specifications
- Working pressure1.3–1.5 ATA (4.3–7 PSI)
- Oxygen delivery93% via concentrator + mask
- Cleared useWellness, recovery; FDA-cleared for acute mountain sickness
- Portability18–40 kg, carry bag, 5–8 min setup
- Power / install110–240V wall outlet, fits 32 in doorway
- MACY-PAN lineL1 / ST1700 / ST2200 / ST701–1001
SYSTEM / MEDICAL HBOT
Hard-shell Chamber
2.0–3.0 ATA Working Pressure
Hard-shell Specifications
- Working pressure2.0–3.0 ATA
- Oxygen delivery100% pure oxygen, hood/mask
- Cleared useWound healing, decompression sickness, carbon monoxide poisoning
- Portability≥575 kg, fixed install
- Power / installDedicated power, professional install
- MACY-PAN lineHE5000 / HP1501 / HP2202 / MC750
Sources: clinical pressure/oxygen and FDA clearance scope (U.S. FDA); mild-HBO physiology (NIH/PMC9965672).
What the regulators actually say
Soft-sided “bag” chambers have drawn consumer warnings, and ASME PVHO-1, the human-occupancy pressure-vessel standard, applies above 2 PSI differential (ASME PVHO-1). Our honest takeaway: buy soft when your interest is wellness and recovery, and buy hard when a clinical, 100% oxygen indication is on the table. MACY-PAN produces both, so we’ve no reason to blur that line.
Here’s the counter-intuitive insight worth repeating, because 1.5 ATA captures most of the benefit of 2.0 ATA: more pressure is not always better, and a longer session does not always mean a better outcome. A well-matched session beats chasing total pressure time. We would rather lose a sale to an honest spec than sell a 2.0 ATA machine to someone who needs a 1.5 ATA recovery seat.
Comparing us against another brand’s quote?
Request a custom side-by-side comparison →
Certifications & Compliance, ISO 13485, CE & ASME PVHO-1
Many thin reseller sites promise “highest quality” – with a complete void behind those words; which would become abundantly clear upon import or audit. Here is the difference: every MACY-PAN unit carries ISO 13485 medical-device quality manufacturing, the EU CE mark, and material validation by SGS.
Here is where the manufacturer model becomes powerful. Because MACY-PAN has the certifications directly, the buyer receives ISO 13485, CE and SGS docs straight from the factory, not a reseller who must confirm with their supplier. A very common hurdle cleared during the buyer’s vetting process.
The compliance question buyers actually ask
For US wellness use, a soft chamber can usually be purchased without a prescription if clearly labeled and only used for general wellness. Clinical indications require a prescription (U.S. FDA). Our 2.0 ATA hard-shell chambers are built to the ASME PVHO-1 pressure-vessel standard (ISO 13485), because human-occupancy chambers above 2 PSI differential fall under that regime. We provide you the full certificate set – never a marketing buzzword.
Hover to verify
SGS
Material verification
Hover to verify
ISO 13485
Medical-device QMS
Hover to verify
CE
EU import marking
FACTORY DOCUMENTS
Hover to verify
ASME PVHO-1
Pressure-vessel standard (hard line)
FACTORY DOCUMENTS
Hover to view
ISO 9001
Quality management
FACTORY DOCUMENTS
Hover to view
PATENTS
Invention + design registered
FACTORY DOCUMENTS
MANUFACTURER COMMITMENT
Unlike a reseller who will drop ship and brand the product, MACY-PAN operates its own certified production lines. You buy direct from our ISO 13485 system which means your warranty, support and spare parts access are tied directly to the manufacturer, not a third party. Engineers and technicians who build your unit are one email away, not passed around a call center.
Ready to price a single unit or a distributor program?
Request a factory quote →FACTORY DIRECT
Buying Direct From the Factory, Pricing Factors, MOQ, OEM & Lead Time
Sticker shock hits quickly when exploring pricing. Pre-owned units often sell at about half the price of new models. New clinical chambers are well north of this price range. What buyers search as the portable hyperbaric chamber price is rarely the real frustration; the hidden costs for accessories and support after the chamber number is settled are. Buying direct removes the intermediary margin and clearly shows the full Bill of Materials (BOM).
Pricing Factors Framework (what actually moves your quote)
Instead of a single, opaque figure, your final chamber price reflects six factors: (1) construction (soft or hard shell), (2) pressure / ATA and chamber size, (3) single versus multi- occupant design, (4) 5 L/min or 10 L/min O2 concentrator, (5) custom design and OEM specifications, and (6) order volume.
Soft home chambers average $7,499-$18,000; hard chambers typically start around $30,999-$47,995+.-
Order even 1 unit; verify our quality with an initial sample. We work from MOQ of 1.
-
Custom chamber colours, logo imprint, branding on manual and packaging are all possible via our OEM/ODM programs.
-
Shipping via DHL Express; takes 5-7 days worldwide with insurance and tracking in one carton.
-
Our chamber construction is referenced in USPTO patent US9622931B2 (portable vertical-entry chamber).
INTERACTIVE RESOURCES
Hyperbaric Planning & Selection Tools
Navigate the complexities of clinical and home hyperbaric procurement. Use our interactive frameworks below to objectively compare soft versus hard shells, calculate precise return on investment (ROI) metrics, and verify spatial fit requirements before you request a final quote.
TOOL 01
Soft-vs-Hard + Model Selector
A guided framework to match your intended ATA pressure, oxygen purity needs, and usage environment with the appropriate chamber architecture.
Initialize Selector
TOOL 02
Portable HBOT Payback Estimator
Calculate your clinic’s break-even point and revenue projections based on custom session pricing and estimated weekly volume.
Run Estimator
TOOL 03
Chamber Fit & Doorway Calculator
Input your facility’s doorway widths, corner angles, and floor space to ensure seamless delivery, setup, and operation.
Open Calculator
Get a factory-direct quote on a portable hyperbaric chamber
17 years
126 countries
ISO 13485 /CE/SGS
soft 1.3-1.5ATA & hard 2.0ATA
How much does a portable hyperbaric chamber cost?
Soft home units average $7,499-$18,000; the prevailing price range for 2.0 ATA hard chambers starts from $30,999 level. Based on the six pricing drivers (construction, ATA/size, capacity, concentrator type, OEM requirements, volume), get a personalized quote.
Do soft / inflatable hyperbaric chambers actually work?
Buyers asking “do home hyperbaric chambers work” and “best hyperbaric chamber for home use” are really asking about evidence. Mild hyperbaric evidence for wellness and recovery is growing and positive. One trial reported improvements in NK-cell counts and parasympathetic function with a 1.4 ATA chamber and no rise in oxidative stress (NIH/PMC9965672). Nevertheless, please be aware: a 1.4ATA home chamber isn’t the same as a 2-3 ATA clinical unit for wound healing or pressure injuries and we won’t misrepresent this difference.
Is it legal to own one, and do I need a prescription?
In the US, soft chambers may be sold without a prescription if intended solely for general wellness. A prescription is required only for specific medical conditions. FDA has cleared soft chambers for acute mountain sickness.
Can you provide the FDA, ISO 13485 and ASME PVHO-1 documents?
Yes. As the manufacturer, MACY-PAN supplies the ISO 13485, ISO 9001, CE and SGS certificate set directly, plus the ASME PVHO-1 documentation for the hard-shell line. A reseller usually cannot.
Will an outer pressure gauge or zipper fail early?
An outer pressure gauge failed within the first year is a complaint buyers raise about cheaper brands. MACY-PAN uses dual mechanical gauges (no batteries to die) and triple-layer YKK zippers, where each layer holds pressure independently.
How portable is it, and how long to set up?
Soft models can be packed in a carry bag at 18-40kg, powered with a 110-240V outlet; 5-8 minute setup from un-boxing. At 18 kg, an ST1700 checks onto a flight.
How do I avoid a cheap knock-off?
Cheap knock-off chambers pushed above their pressure limits is the true safety risk. Make sure your TPU chambers have an SGS-certified grade and that they also have a certificate number and manufacturer, not just a label on a re-branded import.
Who should not use a hyperbaric chamber?
Anyone with an untreated collapsed lung (pneumothorax) or a severe ear or sinus infection shouldn’t use one, because pressure equalization causes pain. Consult a clinician before starting hyperbaric therapy.
Factory Selection Support
Need a hyperbaric chamber matched to your room, pressure target, and compliance documents?
MACY-PAN helps clinics, wellness centers, distributors, and home buyers compare soft-shell, hard-shell sitting, and medical-grade lying chambers before quotation. Send your intended use, available space, country, and preferred ATA range, and our team will recommend a practical model path.
2007HBOT manufacturing since
126+countries shipped to
1.3-2.0ATA chamber range
